RAIDking™
920RDF Series - 24 Bay, Dual Controller, 4 Gbit/sec.
Fibre to SAS Rack Mount RAID featuring the Intel IOP 341 64
Bit RISC processor. Available with 12 - 48 TB of Enterprise Grade
storage.
RAIDking™
920RFC Series - 24 Bay, Single Controller, 4 Gbit/sec. Fibre
to SAS Rack Mount RAID featuring the Intel IOP 341 64 Bit RISC
processor. Available with 12 - 48 TB of Enterprise Grade storage.
RAIDking™
842RFC Series - 16 Bay, 4 Gbit/sec. Fibre to SATA II Rack
Mount RAID featuring the AMCC PPC440SP 64 Bit RISC processor. Available
with 8 - 32 TB of Enterprise Grade storage.
RAIDking™
640RFC Series - 12 Bay, 4 Gbit/sec. Fibre to SATA II Rack
Mount RAID featuring the AMCC PPC440SP 64 Bit RISC processor. Available
with 6 - 24 TB of Enterprise Grade storage.
RAIDking Technologies'
Fibre to Serial ATA RAID storage solutions are designed specifically
to fit anywhere from the smaller work group all the way up to the
performance driven large server environment.
These ultra-reliable,
high performance, yet affordable Fibre Channel RAID arrays are available
at a significantly reduced cost due to their use of inexpensive Serial
ATA drives. With a capacity of up to 48 TB these 4 Gbit/sec. Fibre
devices suit a highly versatile range of applications.
By connecting
directly to a host server or Fibre switch via an SFP transceiver and
utilizing an onboard microprocessor, the RAIDking™ Fibre RAID
storage solutions give your data the security and performance of Fibre
Channel RAID, yet the cost effectiveness of Serial ATA.
Today's SATA
II technology has increased the burst transfer rates to 3 Gbit/sec.,
providing the highest levels of disk throughput and enhancing data
integrity as well. The SATA II drives even outperform SCSI drives
at a fraction of the cost. Ask yourself, "Why Pay More To Get
The Same?"
Extreme
User Friendliness is our advantage.
As opposed to
conventional disk arrays that usually require experienced specialists
to deal with complicated and time consuming setup procedures, all
RAIDking™ RAID storage solutions feature a revolutionary new
concept:
Innovative
Plug and Play RAID
As compared to
the conventional disk array’s long and tedious setup procedures,
the RAIDking™ RAID storage solutions can be ready to initialize
in just a few minutes, by using their simple, step by step, built-in
setup program. Hooking up your RAIDking™ RAID storage solution
to your server is simple and painless.
Powerful
Performance Without Compromise
The RAIDking™
Fibre RAID storage solutions are designed to enhance your capability
and productivity by offering advanced performance and state-of-the-art
features in a high quality, modular and compact disk array subsystem,
that is also one of the fastest systems on the market. Just check
out some of the unique features:
- Independent
Fault Isolation:
Each hard drive is on a separate data channel – if a drive
fails, it won’t affect or corrupt data on another drive.
- Fault Tolerance:
Allows the disk array to continue functioning, even when one* of
the hard disks has failed.
*(Two disks can fail simultaneously with no data loss if the hot-spare
function is enabled)
- Auto Rebuild:
When a replacement disk has been installed, the RAIDking™ RAID
storage solutions provide automatic data rebuild without the need
for any commands or functions to be keyed in. (Transparent to Host)
- Operating
Status:
A LCD status panel displays a comprehensive readout of the operating
status and the HDD LED indicators on each hard disk tray display
the status of the individual hard disk. This information can also
be accessed with a web browser through the built-in CGI based GUI,
which is also capable of notifying you about events via email or
SNMP.
- Hot Spare
Feature:
A hard disk can be used as a hot standby disk. When a hard disk
error occurs on one of the RAID drives, this on-line hot spare disk
will automatically replace the failed hard disk drive.
- Hot Swap
Feature:
You can remove and install the hot swap parts without interrupting
data access while your RAIDking™ RAID storage solution is on.
These hot swap parts include the hard disks, redundant power supply
units and cooling fans.
- Ultra High
Speed:
Interface support for 1 Gbit/sec., 2 Gbit/sec. and 4 Gbit/sec. Fibre,
up to 4 Gbit/sec. data transfer rate.
- Power Supply:
Redundant and load sharing dual power supplies.
- Operating
Systems:
Operating system independent and transparent. Certified for all
major operating systems, including Windows 95/98/ME/NT/2000/2003,XP,
XP64, Linux, Novell, UNIX, SGI, SUN, HP, IBM and Mac.
- Hard Disk
Compatibility:
Compatible with most SAS drives with capacities ranging from 500
GB to 2 TB.
Consistently
rated among the industry leaders and trusted for quality and reliability,
all RAIDking™ products have been through comprehensive functional
and mechanical tests in order to ensure the highest level of product
quality in design and manufacturing. All RAIDking™ storage solutions
come with Lifetime Technical Support included at no extra charge.
RAIDking™
Technologies' RAID storage solutions are used by the US Armed Forces,
NASA and the US Federal Government, along with major
corporations, educational institutions and hospitals worldwide.
By now, we're
looking forward to welcoming your company to our long list of satisfied
customers. Because at RAIDking™, our sole mission is to deliver
exceptional data integrity, system serviceability and top performance
at a price that fits your budget. In return, this enables you to improve
your productivity and streamline your information flow.
Call us today,
toll free at 1-800-799-7262 for a price quote on your next RAID
storage solution, and find out why RAIDking Technologies is "The
Leader In Cost Effective RAID Storage Solutions".
